Samsung OfficeServ 7200 Programming Manual page 259

CHAPTER 2. MMC Programming
DEFAULT DATA
For phones, buttons 1 and 2 are set as CALL buttons by default. (Other settings depend on
the keyset type.) For AOMs, all buttons are set as DSS buttons by default.
ACTION
1. Press Transfer button and enter 722.
Display shows:
2. Enter selected station number (e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
3. Enter selected key number (e.g., 18)
OR
Press Volume button to select key number and
press Right Soft button to move cursor.
4. Using table above, press dial keypad to select num-
ber.
OR
Press Volume button to make selection and press
Right Soft button to advance cursor to step 5 to
enter extender, if required, or to return to step 2.
5. Enter extender if required (e.g., 03)
OR
Press Volume button to make selection and press
Right Soft button to return to step 2.
6. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 107
MMC 720
MMC 721
Samsung Business Communications
KEY EXTENDER
COPY KEY PROGRAMMING
SAVE STATION KEY PROGRAMMING
OfficServ 7200 Programming Guide
DISPLAY
[201] KEY (MAST)
01:CALL1
[205] KEY (MAST)
01:CALL1
[201] KEY (MAST)
18:NONE _
[201] KEY PROG.
18:NONE GPIK_
[201] KEY PROG.
18:NONE GPIK03
2-228