Samsung OfficeServ 7200 Programming Manual page 118

CHAPTER 2. MMC Programming
[318] DISTINCTIVE RINGING
Allows the technician to select the ring tone heard at a keyset when called by a specific sta-
tion or when a specific trunk rings that keyset. There is also a cadence control option to
perform a similar function for SLTs.
There are eight ring tones available along with a Follow Station option (default) for keysets.
There are five cadences and a Follow Station option (default) for SLTs. See table, below.
It also allows the technician to assign the call priority for a group call when called by a
specific station or when a specific trunk rings that phone. When calls come into a station
group and all group members are busy, the system will assign a priority to a specific station
or a specific trunk so that high priority calls will be placed at the front of the group queue.
If this option is set to NO, the call held longest in the group queue has the highest priority.
There are nine priority levels: level 1 is the highest and level 9 is the lowest.
Option
TONE Calls will ring with the keyset user's choice of ring frequency.
Option
CADENCE Calls will ring with the normal SLT ring cadences.
Option
CONDITIONS
Digital phone (keyset) rings are distinguished by their tone. If the T (TONE) of the
calling internal/external phone is set to 'NO', the bell rings according to the normal
setting in MMC 111, PHONE RING TONE, for the receiving station. If T is set to 1-8,
the bell rings according to the designated ring tone.
SLT rings are distinguished by their ringing interval. If the C (CADENCE) of the call-
ing internal/external phone is set to 'NO', the bell rings according to the interval set in
MMC 510, SLI RING CADENCE, for each calling station type. If C is set to 1-5, the
bell rings according to that interval regardless of the calling station type.
Samsung Business Communications
No
1~8 Calls from the programmed station or trunk will ring with this frequency.
1 Calls from the programmed station or trunk will ring with the intercom ring ca-
dence.
2 Calls from the programmed station or trunk will ring with the CO ring cadence.
3 Calls from the programmed station or trunk will ring with the DOOR ring ca-
dence.
4 Calls from the programmed station or trunk will ring with the ALARM ring ca-
dence.
5 Calls from the programmed station or trunk will ring with the CALLBACK ring ca-
dence.
OfficServ 7200 Programming Guide
Description
2-87