Samsung OfficeServ 7200 Programming Manual page 349

CHAPTER 2. MMC Programming
No Parameter
09 MIN JITTER
10 MAX JITTER
11 FAX ECM
12 MAX FAX CNT
13 DTMF TYPE
14 TOS FIELD
15 FAX RETRY
16 RTP CHK TM
DEFAULT DATA
SEE DESCRIPTION
Samsung Business Communications
Description
Decides the minimum time to consider delay for jitter
adjustment.
The range is 010~300 ms
Decides the maximum time to consider delay for jitter
adjustment.
The range is 010-300 ms.
This option selects retry of Fax-over-IP if errors are de-
tected.
This is the maximum number of channels that can be
simultaneously used for Fax-over-IP. The range is
00~16.
There are two types of DTMF transmission: INBAND,
which is industry standard (H.245) type DTMF transport,
and OUTBAND which is a Samsung proprietary
method.
An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at the default value (00000) if your network infra-
structure does not support this method of bandwidth
management.
This option selects retry count of Fax-over-IP if errors
are detected. The range is 0~4 (0 means no retry).
This options selects the interval time for sending RTCP.
OfficServ 7200 Programming Guide
Default
30 ms
150 ms
ENABLE
2
OUTBAND
All bits 0
3
5 SEC
2-318