Samsung OfficeServ 7200 Programming Manual page 373

CHAPTER 2. MMC Programming
5. Set the items below at the WBS24 menu. The se-
lected WBS is as set in MMC 849 (SELECT AP
TYPE option) i.e. CWBS=COMBO WBS,
BWBS=BASIC WBS.
Register the WBS24 IP ADDRESS.
Register the WBS24 NET MASK.
Register the WBS24 GATEWAY.
Displays the WBS24 MAC ADDRESS.
Displays the WBS24 VERSION.
Displays the WBS24 STATUS.
Register the WBS24 RF CHANNEL. (The WBS RF
channel must be selected from the pre-assigned
RF channels in WLAN RF CHANNELS).
Register the WBS24 TX POWER.
(Default: LEVEL 1~4)
Used to clear the WBS parameter.
6. Set the items below at the menu.
Register the RE-TRANS T1.
The initial re-transmission time if no answer,
based on the RFC2543 specification.
The range is 0-9900 ms. (Default: 500 ms)
Register the RE-TRANS T2.
The maximum re-transmission time if no answer,
based on the RFC2543 specification.
The range is 0-9900 ms. (Default: 4000 ms)
Samsung Business Communications
OfficServ 7200 Programming Guide
CWBS1: IP ADDR
0. 0. 0. 0
CWBS1: NET MASK
255.255.255. 0
CWBS1: GATEWAY
0. 0. 0. 0
CWBS1 : MAC ADDR
FFFF FFFF FFFF
CWBS1 : VERSION
CWBS1 : STATUS
OFF
CWBS1 : RF CHAN
USE CH 1:01
CWBS1 : TX POWER
DEFAULT
CWBS1 : PARA CLR
ARE YOU SURE?NO
SIP : RE-TRANS T1
000500MS
SIP : RE-TRANS T2
004000MS
2-342