Samsung OfficeServ 7200 Programming Manual page 121

CHAPTER 2. MMC Programming
[320] PRESET FORWARD NO ANSWER
Allows a technician to assign a default destination for Forward No Answer (FNA) to each
station on the system. These destinations may be the same or different for each station. The
preset FNA destination will be temporarily overwritten if the station user enters a different
FNA destination. If you cancel the new destination, the preset destination will once more
be in effect. Preset FNA time follows the station 'NO ANS FWD' timer (MMC 502).
Preset FNA can be assigned respectively for each type of call.
No Type
0 INT
1 EXT
2 BOTH
DEFAULT DATA
NONE
ACTION
1. Press Transfer button and enter 320.
Display shows:
2. Dial station number (e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
OR
Select all stations.
3. Dial valid number via keypad.
OR
Press Volume button to select call type and
press Right Soft button to move cursor.
Samsung Business Communications
Preset FNA applies only to intercom calls.
Preset FNA applies only to incoming calls.
Preset FNA applies to both intercom and incoming calls.
If PRE FWD BUSY option in MMC 210 is set ON, the forward busy follows this
feature.
OfficServ 7200 Programming Guide
Description
DISPLAY
[201] PRESET FNA
NONE OPT:BOTH
[205] PRESET FNA
NONE OPT:BOTH
[ALL] PRESET FNA
NONE OPT:BOTH
[205] PRESET FNA
202 OPT:BOTH
2-90