Samsung OfficeServ 7200 Programming Manual page 322

CHAPTER 2. MMC Programming
[819] SMART MEDIA FILE CONTROL
Displays the size (in bytes) of various system program files on the SmartMedia card. Also
allows deletion of a file by selecting the file and pressing the HOLD key.
Files included in Smart Media are described below:
File Name
STARTUP.INI
STARTUP.PRE
MCPMxxx.PGM
MCPExxx.PGM
LCPV200.PGM
PRIV100.PGM
DATABASE.MPP
DEFAULT DATA
NONE
Samsung Business Communications
If you designate an MCP or SCP program in MMC 818, related data are saved in
this file. This file is initially not included but is created when the above programs are
selected at MMC 818.
When the system is first started, this program uses the memory of the MCP
card to load the Smart Media MPP program. This program must be included
to start the system.
Program for MCP card.
Since the MCP program is not installed on the MCP card itself, at least one
MCP program must be included in Smart Media to start the system. Files
named MCPMxxxx.PGM represent programs for the Main system, and those
named MCPExxxx.PGM represent programs for the Extended system. Smart
Media must include the correct MCP program corresponding to the system
type (Extended or Main).
LCP program. The LCP program is installed on the card itself. The one in-
cluded in Smart Media is used for software version upgrade.
TEPRI program. The TEPRI program is installed on the card itself. The one
included in Smart Media is used for software version upgrade.
This file is created in Smart Media when DB is saved to SMDB by MMC 815.
Initially not included, this file is created only when SMDB is created by MMC
815.
OfficServ 7200 Programming Guide
Description
2-291