Samsung OfficeServ 7200 Programming Manual page 379

CHAPTER 2. MMC Programming
[849] WLAN CONFIGURATION
This MMC is used to set the WLAN configuration.
Parameter
REGISTER VoWLAN
WIP REGIST CLEAR
WBS WEP SERVICE
WEP KEY
STATIC WBS IP
STATIC WIP IP
SELECT AP
DEFAULT DATA
REGISTER VoWLAN: DISABLE
WIP REGIST CLEAR: DISABLE
WBS WEP SERVICE: DISABLE
WEP KEY: NONE
STATIC WBS IP: DISABLE
STATIC WIP IP: DISABLE
SELECT AP TYPE: BASIC AP (DEPENDS ON COUNTRY)
ACTION
1. Press Transfer button, and press 849.
2. Enter the PASSCODE.
(This PASSCODE is assigned in MMC 202
WLAN REGST)
3. Select ENABLE to register a terminal.
4. Select WIP REGIST CLEAR to clear the registration
status for a terminal.
5. Select the WEP KEY setting when ENCRYPTION
is selected.
Samsung Business Communications
Enable or disable registration of new WIP-5000M mobile phone.
Used to clear the registration of WIP. FORCED mode clearing is used
when the device is not connected normally (e.g. device broken), other-
wise the NORMAL mode clearing can be used.
Enable or disable the WEP (Wired Equivalent Privacy) feature
Assign the WEP key (13 characters only)
Select the use of Static WBS IP
Select the use of Static WIP IP
Select if using COMBO or BASIC APs (If COMBO is selected, a WLI card
must be installed in the system. BASIC allows APs to run without this
card.)
OfficServ 7200 Programming Guide
Description
DISPLAY
ENTER PASSWORD
_
ENTER PASSCODE
****
REGISTER VoWLAN
ENABLE
WIP REGIST CLEAR
3301:FORCED
WBS WEP SERVICE
DISABLE
2-348