Samsung OfficeServ 7200 Programming Manual page 155

CHAPTER 2. MMC Programming
CONDITIONS
Before setting the PRI program, the J2 jumper of the TEPRI card must be set to 'ON'
for PRI mode.
After changing this program, run MMC 418, BRI AND PRI CARD RESTART, to ap-
ply the new setting.
DEFAULT DATA
CHANNEL ANY: YES
PRI MODE: DDI
DLSEND: OVERLAP
CLIP TABLE: NONE
NB TYPE: NATIONAL
NB PLAN: ISDN
ACTION
1. Press Transfer button and enter 420.
Display shows:
2. Dial first PRI trunk number in PRI card (e.g., 730)
OR
Press Volume button to make selection and
press Right Soft button.
3. Enter option number.
OR
Press Volume button to select option.
4. Press Volume button to make selection.
Then press Right Soft button.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 323
MMC 405
MMC 418
MMC 714
Samsung Business Communications
CALLING PARTY NUMBER
TRUNK CO TEL NUMBER
BRI & PRI CARD RESTART
DID NAME AND NUMBER TRANSLATION
OfficServ 7200 Programming Guide
DISPLAY
[701] PRI OPTION
CHANNEL ANY:YES
[730] PRI OPTION
CHANNEL ANY:YES
[730] PRI OPTION
PRI MODE:DDI
[730] PRI OPTION
PRI MODE:NORMAL
2-124