Samsung OfficeServ 7200 Programming Manual page 307

CHAPTER 2. MMC Programming
[805] TX LEVEL AND GAIN
Allows the system administrator to set the base level of TX volume on phones. There are
eight levels that can be controlled by the Volume buttons on phones, and 10 controllable
levels in the system. This MMC allows the system administrator to classify any desired
eight levels within 11.
No
0 TX LEVEL CONTROL
1 MISC TSW GAIN
2 TSW GAIN
CONTROL
DEFAULT DATA
RX
TX
DGP
SLT
ATRK
DTRK
DECT
VOIP
SVMi
WLAN
Samsung Business Communications
Option
Adjusts the transmitting sensitivity (max.: 9) Default values are:
INDEX: 0
LEVEL: 0
Adjusts the level of the internal music source of the MCP card or
the external music source of the MIS card (0~7, higher numbers
mean lower levels). Default value is 0.
Adjusts the tone sensitivity. There are eight types of matrix connec-
tions of the T-Switch that adjust the tone sensitivity (0-7, below).
Connection between Trunk lines are only applicable when set as 0
in MMC 421.
0 DGP DLI phone
1 SLT
2 ATRK Analogue trunk
3 DTRK Digital trunk
4 DECT DECT terminal
5 VOIP MGI port or IP-based phone
6 SVMi SVMi port
7 WLAN WIP port
Do not change the default levels in this MMC without the assistance of
Technical Support.
DGP SLT
0.0 0.0
0.0 -2.5
0.0 0.0
0.0 -2.5
0.0 0.0
0.0 0.0
0.0 0.0
-6.0 -2.5
Description
1 2 3 4
1 2 4 3
SLI phone
ATRK DTRK DECT
0.0 0.0 -6.0
0.0 -2.5 -6.0
+1.9 -6.0 -6.0
+1.9 0.0 -6.0
0.0 +1.9 -6.0
0.0 0.0 -6.0
0.0 0.0 -6.0
-6.0 0.0 0.0
OfficServ 7200 Programming Guide
5 6 7
5 6 7
VOIP SVMi
0.0 -6.0
0.0 -6.0
0.0 -6.0
0.0 -6.0
0.0 -6.0
0.0 -6.0
0.0 -6.0
0.0 0.0
WLAN
+1.9
+1.9
+1.9
0.0
0.0
0.0
0.0
+1.9
2-276