Samsung OfficeServ 7200 Programming Manual page 325

CHAPTER 2. MMC Programming
[821] ASSIGN NETWORK TRUNK
Assigns the Q-signalling PRI trunk for networking. It is assigned data on a per-TEPRI card
basis.
DEFAULT DATA
NORMAL
ACTION
1. Press Transfer button and enter 821.
Display shows:
2. Enter first trunk number of PRI card.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3. Enter 0 for NORMAL, or 1 for Q-SIGNALLING.
OR
Press Volume button to make selection and
press Right Soft button to save and move cursor.
4. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
Samsung Business Communications
OfficServ 7200 Programming Guide
DISPLAY
[701] Q-SIG TRK
NORMAL
[701] Q-SIG TRK
NORMAL
[701] Q-SIG TRK
Q-SIGNALLING
2-294