Samsung OfficeServ 7200 Programming Manual page 254

CHAPTER 2. MMC Programming
[720] COPY KEY PROGRAMMING
Provides a tool for duplicating key assignments from one phone to another. This can be
done on a per-station basis or on all stations, but not on a group of stations. A limitation is
that the original and target phones must be of the same type (the same number of buttons).
DEFAULT DATA
NONE
ACTION
1. Press Transfer button and enter 720.
Display shows:
2. Enter the station number to copy to (e.g., 205)
OR
Press Volume buttons to make selection and
press Right Soft button to move cursor.
OR
Select all stations.
3. Enter station number to copy from (e.g., 203)
and cursor returns to step 2.
OR
Press Volume buttons to make selection and
press Right Soft button to return to step 2.
4. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 107
MMC 721
MMC 722
MMC 723
Samsung Business Communications
KEY EXTENDER
SAVE STATION KEY PROGRAMMING
STATION KEY PROGRAMMING
SYSTEM KEY PROGRAMMING
OfficServ 7200 Programming Guide
DISPLAY
[201] COPY KEY
FROM:NONE
[205] COPY KEY
FROM:NONE
[205] COPY KEY
FROM:203
2-223