Samsung OfficeServ 7200 Programming Manual page 287

CHAPTER 2. MMC Programming
[752] AUTO RECORD
This MMC is only used for the Samsung Built-In Voice Mail card. Specific stations in the
phone system can be assigned to automatically record conversations. When this option is
set, all incoming, all outgoing, or all calls (incoming and outgoing) can be recorded.
In this MMC you can assign:
Station number: Which station can use this feature.
Mailbox number: What mailbox the conversations are recorded in.
I, O or B: What type of calls are recorded (in, out or both).
Voice mail port number: What port is dedicated to the station.
CONDITIONS
A maximum of eight stations can use this feature at one time. The same port cannot be as-
signed to more than one station. Attempts to do this will result in an error message. When a
Voice Mail port is assigned here, it is automatically removed from the Voice Mail group de-
fined in MMC 601.
DEFAULT DATA
NONE
ACTION
1. Press Transfer button and enter 752.
Display shows:.
2. Dial station number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3. Dial mailbox number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
Samsung Business Communications
Before using the Auto Record feature, make sure that you are not violating
any laws. Samsung is not responsible for any illegal use of this feature.
OfficServ 7200 Programming Guide
DISPLAY
AUTO RECORD
STN:201 MB:NONE
AUTO RECORD
STN:201 MB:NONE
AUTO RECORD
STN:201 MB:201
2-256