Samsung OfficeServ 7200 Programming Manual page 54

Enterprise ip solutions

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

CHAPTER 2. MMC Programming

[111] PHONE RING TONE

Allows the system administrator or technician to select the ring tone heard at each phone.

Eight ring tones are available. A short tone burst of the selection will be heard when the

dial keypad is pressed.

DEFAULT DATA

FREQUENCY: 5

1. Press Transfer button and enter 111.

Display shows:

2. Dial phone number (e.g., 205)

Press Volume button to select station and

press Right Soft button to move cursor.

Select all stations

3. Dial 1~8 to select ring tone.

Press Volume button to select ring tone and

press Right Soft button to move cursor.

4. Press Transfer button to save and exit.

Press Speaker button to save and advance to

Table of Contents