Modify Service Processor Network Settings (Bios) - Oracle X6 series Administration Manual

Modify Service Processor Network Settings (BIOS)

Related Information
Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at
■
www.oracle.com/goto/ohmp/docs
Modify Service Processor Network Settings (BIOS)
Use this optional procedure to modify the default Oracle ILOM network settings.
For IPv4 network environments, the IP Discovery Mode property is set to DHCP by default.
■
For IPv6 network environments, the Autoconfig property is set to Stateless by default.
■
Access the BIOS Setup Utility.
1.
For instructions, see
2. Navigate to the Advanced menu.
3. Select BMC Network Configuration.
The BMC Network Configuration screen appears.
To configure an IPv4 environment, perform the following steps in the IPv4
4.
portion of the screen:
68 Oracle X6 Series Servers Administration Guide • April 2016
"Accessing the BIOS Setup Utility" on page
http://
33.