Oracle X6 series Administration Manual page 73

i Specify a Date and Time, and then click Save.
ii Click the Timezone tab.
iii Select a Timezone from the drop-down list.
Click Save.
iv
To synchronize the service processor clock with an NTP server, do the
■
following:
i Select the Enabled check box in the Synchronize Time Using NTP
field.
ii Enter the IP address or hostname of one or more NTP servers.
iii Click Save.
2. To set the service processor clock from the Oracle ILOM command-line interface
(CLI), perform the following steps:
a. Log in to the Oracle ILOM CLI.
For instructions, see
b. Configure the service processor clock manually, or enable the clock to
synchronize with an NTP server:
■ To set the service processor clock manually, use the
set /SP/clock datetime= MMDDhhmmYYYY timezone=3_to_4_characters
■ To synchronize the service processor clock with an NTP server, use the
command:
set
set /SP/clock usentpserver=enabled
set /SP/clients/ntp/server/[1|2] address=address
Related Information
Setting Properties for SP or CMM Clock, Oracle ILOM Administrator's Guide for
■
Configuration and Maintenance, Firmware Release 3.2.x at
goto/ilom/docs
"Accessing Oracle ILOM" on page
Set the Service Processor Clock (Oracle ILOM)
21.
command:
set
http://www.oracle.com/
Configure the Service Processor 73