Oracle Ilom Tasks - Oracle X6 series Administration Manual

Oracle Integrated Lights Out Manager (ILOM)
For more information about the firmware, see the following sections:
"Oracle ILOM Tasks" on page 16
■
"Oracle ILOM Documentation" on page 17
■

Oracle ILOM Tasks

The following table lists many of the tasks you can perform using the Oracle ILOM web or
command-line interface.
Web Navigation
System Information
Remote Control
Host Management
System Management
Power Management
ILOM Administration
16 Oracle X6 Series Servers Administration Guide • April 2016
CLI Hierarchy Description
Review information about the server, including the serial
/System
number and BIOS version.
View the overall health of the server and see a total
problem count, or view subcomponent health and
inventory details.
Configure and launch a remote console session.
/HOST/console
Redirect storage devices.
Run diagnostics on the server.
/HOST/diag
Set the next boot device or control the server power state.
/HOST boot_device
/System action
View BIOS settings.
/System/BIOS
Backup or restore a BIOS configuration.
/System/BIOS/Config
Configure system policies such as the Enhanced PCIe
/SP/policy
Cooling Mode policy.
View actual system power consumption.
/SP/powermgmt
View system power requirements for capacity planning.
View historical power usage data.
Configure system identification information.
/SP system_identifier
View system event and audit logs.
/SP/logs
Configure remote management access to the server;
/SP/clients
configure Oracle ILOM user accounts.
/SP/users
Configure service processor connectivity settings.
/SP/network
Back up or restore a service processor configuration.
/SP/network/ipv6
Reset the service processor to default settings.
/SP/config
Configure alert notifications for system events and faults.
/SP/alertmgmt