Oracle X6 series Administration Manual page 30

Configure a Host Storage Device Redirection Session
d. Enter the location of the image on the remote server using either the NFS or
Samba protocol.
■
■
Click Save.
e.
The status of the redirection appears in the Status field.
f. When you are done, to disable redirection, select Disabled from the Mode
drop down menu and click Save.
2. To configure a host storage device redirection in the Oracle ILOM command-line
interface (CLI), perform the following steps:
a. Log in to the Oracle ILOM CLI.
For instructions, see
b. Set the location of the image file by typing:
set /SP/services/kvms/host_storage_device/remote/
server_URI=NFS_or_Samba_URI_file_location [username=username]
[password=password]
c. Enable storage redirection by typing:
set /SP/services/kvms/host_storage_device/ mode=remote
d. To view the status of redirection, type the command:
show /SP/services/kvms/host_storage_device/ status
Note -
e. When you are done, disable redirection by typing:
30 Oracle X6 Series Servers Administration Guide • April 2016
To enter a URI using NFS, use the format: nfs://server:/path/file
For example:
nfs://198.51.100.2:/export/netadmin1/biosimage.img
To enter a URI using Samba, use the format: smb://server:/path/file or
smb://server/path/file.
For example:
smb://198.51.100.2/netadmin1/biosimage.img
"Accessing Oracle ILOM" on page
Redirection is active is the status if set to either Operational or Connecting.
21.