Modify The Boot Order (Bios) - Oracle X6 series Administration Manual

By default, the boot order list is populated only with devices detected on the server that
support the current boot mode. However, if you enable the Persistent Boot Support feature,
every physical slot, network port, and disk drive bay in the server is shown in the boot order
list. For more information about Persistent Boot Support, see
Support" on page 52.
To change the order of devices in the boot order list, see the following procedures:
"Modify the Boot Order (BIOS)" on page 49
■
"Set Temporary Next Boot Device (Oracle ILOM)" on page 50
■

Modify the Boot Order (BIOS)

1. Access the BIOS Setup Utility.
For instructions, see
Navigate to the Boot menu.
2.
The Boot Option Priority list shows the current boot order from top to bottom. For example, the
first device in the list indicates the first boot option.
3. In the Boot Option Priority list, select the device in the boot option slot you want
to modify.
For example, if you want to move a device to the second slot, select the second item in the list.
"Accessing the BIOS Setup Utility" on page
Modify the Boot Order (BIOS)
"Enabling Persistent Boot
33.
Viewing and Modifying Boot Properties 49