Configure Dns Server Information On The Service Processor (Oracle Hardware Management Pack) - Oracle X6 series Administration Manual

Configure DNS Server Information on the Service Processor (Oracle Hardware Management Pack)

Related Information
Modifying Default Connectivity Configuration Properties, Oracle ILOM Administrator's
■
Guide for Configuration and Maintenance, Firmware Release 3.2.x at
com/goto/ilom/docs
Configure DNS Server Information on the Service
Processor (Oracle Hardware Management Pack)
Access the operating system command-line.
1.
For more information, see
To enable Oracle ILOM to automatically retrieve DNS information from a DHCP
2.
server on the network, use the following command:
ilomconfig modify dns --autodns enabled --retries retries --timeout timeout
Where timeout is an integer between 1 and 10, and retries is an integer between 0 and 4.
3. If you prefer to disable
ilomconfig modify dns --nameservers nameserverlist --autodns disabled --retries retries --
searchpath searchpathlist --timeout timeout
Related Information
■ Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at:
www.oracle.com/goto/ohmp/docs
76 Oracle X6 Series Servers Administration Guide • April 2016
"Accessing Oracle Hardware Management Pack" on page
, use the following command:
autodns
http://www.oracle.
31.
http://