Set The Service Processor Clock (Oracle Hardware Management Pack); Configuring Dns Server Information On The Service Processor; Configure Dns Server Information On The Service Processor; Ilom) - Oracle X6 series Administration Manual

Set the Service Processor Clock (Oracle Hardware Management Pack)

Set the Service Processor Clock (Oracle Hardware
Management Pack)
Access the operating system command line.
1.
For more information see
Use the
2.
To set the service processor clock manually, type:
■
ilomconfig modify clock [--datetime=MMDDhhmmYYYY] [--timezone=timezone]
To synchronize the service processor clock with an NTP server, type:
■
ilomconfig modify clock --usentp=enabled|disabled -ntp-server1=ntpserver1 [--ntp-
server2=ntpserver2]
Related Information
Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at
■
www.oracle.com/goto/ohmp/docs
Configuring DNS Server Information on the Service
Processor
Auto DNS via DHCP is enabled by default. However, you have the option of manually
configuring DNS Name Servers and DNS Search Paths. To change DNS server information on
the service processor, see the following procedures:
"Configure DNS Server Information on the Service Processor (Oracle
■
ILOM)" on page 74
"Configure DNS Server Information on the Service Processor (Oracle Hardware
■
Management Pack)" on page 76
Configure DNS Server Information on the Service
Processor (Oracle ILOM)
1. To configure DNS server information from the Oracle ILOM web interface,
perform the following steps:
74 Oracle X6 Series Servers Administration Guide • April 2016
"Accessing Oracle Hardware Management Pack" on page
ilomconfig modify clock
command:
31.
http://