Reset The Oracle Ilom Firmware To Default Settings (Oracle Ilom); Reset The Oracle Ilom Firmware To Default Settings (Oracle Hardware Management Pack) - Oracle X6 series Administration Manual

Reset the Oracle ILOM Firmware to Default Settings (Oracle ILOM)

Related Information
■ Updating the UEFI BIOS (ubiosconfig), Oracle Server CLI Tools User's Guide at
www.oracle.com/goto/ohmp/docs
Reset the Oracle ILOM Firmware to Default
Settings (Oracle ILOM)
1. To reset the Oracle ILOM firmware to default settings in the Oracle ILOM web
interface, perform the following steps:
Log in to the Oracle ILOM web interface.
a.
For instructions, see
In the navigation pane, click ILOM Administration > Configuration
b.
Management, and then click the Reset Defaults tab.
c. In the Reset Defaults drop-down list, select Factory.
Click Reset Defaults.
d.
To reset the Oracle ILOM firmware to default settings in the Oracle ILOM
2.
command-line interface (CLI), perform the following steps:
a. Log in to the Oracle ILOM CLI.
For instructions, see
b. Type
Related Information
Reset the Oracle ILOM Configuration to Factory Defaults, Oracle ILOM Administrator's
■
Guide for Configuration and Maintenance, Firmware Release 3.2.x at
com/goto/ilom/docs
Reset the Oracle ILOM Firmware to Default
Settings (Oracle Hardware Management Pack)
1. Access the operating system command-line interface.
112 Oracle X6 Series Servers Administration Guide • April 2016
"Accessing Oracle ILOM" on page
"Accessing Oracle ILOM" on page
set /SP reset_to_defaults=factoryset
21.
21.
.
http://www.oracle.
http://