Oracle X6 series Administration Manual page 93

a. Log in to the Oracle ILOM web interface.
For instructions, see
b. In the navigation pane, click System Management > Policy.
The Policy Configuration page appears.
In the Service Processor Policies table, select Set Enhanced PCIe Cooling
c.
Mode Policy.
d. Select Enable or Disable in the Actions drop-down list.
The policy takes effect at the next server reset.
To set the Enhanced PCIe Cooling Policy in the Oracle ILOM command-line
2.
interface:
a. Log in to the Oracle ILOM CLI.
For instructions, see
Use the
b.
set /SP/policy ENHANCED_PCIE_COOLING_MODE=enabled|disabled
The policy takes effect at the next server reset.
Related Information
Power On and Cooling Down Policies Configurable from SP, Oracle ILOM Administrator's
■
Guide for Configuration and Maintenance, Firmware Release 3.2.x at:
oracle.com/goto/ilom/docs
"Accessing Oracle ILOM" on page
"Accessing Oracle ILOM" on page
Monitor Server Power Consumption and Component Temperatures
Set Enhanced PCIe Cooling Policy (Oracle ILOM)
21.
21.
command.
http://www.
93