Restore A Saved Oracle Ilom Firmware Configuration (Oracle Ilom) - Oracle X6 series Administration Manual

■ host is the IP address or hostname of the system where the backup file is saved.
filepath is the relative path to the backup file.
■
If you transfer the backup file using TFTP, you do not need to provide a username or
Note -
password.
Related Information
Restore BIOS Configuration, Oracle ILOM Administrator's Guide for Configuration and
■
Maintenance, Firmware Release 3.2.x at
Restore a Saved Oracle ILOM Firmware
Configuration (Oracle ILOM)
Before you begin, ensure that you have the privileges associated with the following roles in
Oracle ILOM: Admin (a), User Management (u), Console (c), and Reset and Host Control (r).
1. To restore a saved Oracle ILOM configuration from the Oracle ILOM web
interface, perform the following steps:
Log in to the Oracle ILOM web interface.
a.
For instructions, see
b. In the navigation pane, click ILOM Administration > Configuration
Management.
c. Select Restore in the Operation drop-down list.
d. In the Transfer Method drop-down list, select a transfer method.
e. Specify the location of the XML file.
f. If you specified a Passphrase when you exported the XML file, enter and
confirm the Passphrase.
With Oracle ILOM 3.2.6 or newer, if you included fault data in the backup, you can
Note -
select Include Fault Data to restore it. This selection is reserved for Oracle service personnel
when they replace the SP. It requires a passphrase.
g. Click Run.

Restore a Saved Oracle ILOM Firmware Configuration (Oracle ILOM)

http://www.oracle.com/goto/ilom/docs
"Accessing Oracle ILOM" on page
Backing Up and Restoring Hardware and Firmware Configurations
21.
107