Accessing And Using System Administration Tools; Accessing Oracle Ilom - Oracle X6 series Administration Manual

Accessing and Using System Administration
Tools
This section provides instructions for accessing and using the system administration tools.
Task
Set up a management connection to the server, and then
launch and log in to Oracle ILOM.
Download, install, and access Oracle Hardware
Management Pack.
Access the BIOS Setup Utility and review BIOS key
mappings for serial terminals.

Accessing Oracle ILOM

Oracle ILOM can be used to configure the system and to monitor the health of the system. It is
firmware embedded on the service processor, and does not need to be installed. You can access
Oracle ILOM any time the system is connected to power, whether the host is operational or not.
You can access Oracle ILOM locally or remotely using a web interface or a command-line
interface (CLI). To get started, see the following sections:
"Oracle ILOM Management Connection Options" on page 22
■
"Cable the Server for a Management Connection to Oracle ILOM" on page 23
■
"Launch and Log In to Oracle ILOM Through a Remote Ethernet
■
Connection" on page 24
"Launching Remote KVMS Redirection Sessions" on page 26
■
Link
"Accessing Oracle ILOM" on page 21
"Accessing Oracle Hardware Management
Pack" on page 31
"Accessing the BIOS Setup Utility" on page 33

Accessing and Using System Administration Tools

21