Table of Contents
Advertisement
Chapter 5
5.2 Warning Codes
The following table lists the warning codes and the contents of parameter readjustments:
Warning code
001/ 201
Frequency upper limit setting (A061/A261)
002/ 202
Frequency lower limit setting (A062/A262)
005/ 205/ 305
Output frequency setting (F001) (*)
015/ 215
Output frequency setting (F001) (*)
019
Home search speed setting (P015)
025/ 225
Output frequency setting (F001) (*)
029
Home search speed setting (P015)
031/ 231
Frequency upper limit setting (A061/A261)
032/ 232
Frequency lower limit setting (A062/A262)
035/ 235/ 335
Output frequency setting (F001) (*)
037
Jog frequency setting (A038)
085/ 285/ 385
Output frequency setting (F001) (*)
086
Multispeed 1 to 15 settings (A021 to A035)
091/ 291
Frequency upper limit setting (A061/A261)
092/ 292
Frequency lower limit setting (A062/A262)
095/ 295
Output frequency setting (F001) (*)
- The inverter displays a warning code when the data set as a target function code satisfies the condition (specified in the
Condition column) in relation to the data set as the corresponding basic function code.
- When the inverter is warning, it can not run to work the motor. Refer to the above column and modify the patramerters to the
correct data.
- When the inverter is warning, you can confirm the warning information 'd090'.
* These parameters are checked, even when the digital operator (02) is not specified for the frequency source setting (A001).
Target function code
5-10
Error Codes
Condition
Basic function code
>
Maximum frequency setting
>
(A004/A204/A304)
>
>
Frequency upper limit setting
(A061/A261)
>
<
Frequency lower limit setting
(A062/A262)
<
<
<
Start frequency adjustment (b082)
<
<
Jump (center) frequency settings 1/2/3
< >
± " Jump (hysteresis) frequency width
settings 1/2/3"
A063 ± A064, A065 ± A066,
< >
A067 ± A068
＞
＞
Free-setting V/f frequency (7) (b112)
＞
Advertisement
Table of Contents
