Table of Contents
Advertisement
The Hitachi SJ700D-3 series succeed the SJ700-2 series with the additional and enhanced features.
The table below is a belief summary of the major improved features.
Subject
Dual rating
Constant torque/
Variable torque
Easy sequence
(EzSQ) – Drive
program function
Optional LCD
Operator
RS-485 serial
communications
Initialization
Phase loss
protection
SJ700-2
N/A
Process with 1 task.
SRW operator
(2-line LCD)
WOP operator
(2-line LCD)
19.2kbps (maximum)
After setting b084
(initialization selection),
press some keys.
Input phase loss
protection
SJ700D-3
Selectable
Supporting 5 tasks
processing with
improved user
friendliness.
Full compatibility with
WOP operator
(5-line LCD and
multi-language)
115.2kbps (maximum),
and so on.
In addition to the
conventional method,
executing initialization
by a parameter is
possible.
(Select b084 and
b180=01 : enable the
initializing)
Input phase loss
protection
Output phase loss
protection
SJ700-2 to SJ700D-3
Point!
If the inverter drives the light
load application (e.g. fan pump
application), you can choose
the one size smaller capacity
inverter than the motor capacity.
The inverter processes 5 tasks at
the same time, which allows you
to realize 5 times faster EzSQ
processing in maximum.
WOP, the optional LCD Operator,
provides several user friendliness;
- Multi data monitoring
- Parameter configuration as
monitoring data
- Multi-language display
- Parameter / Program copy
SJ700-2 to SJ700D-3:available partially
SJ700D-3 to SJ700-2:un available
Approx. 6 times faster
communication in comparison with
the former model are supported. In
addition, some communication
commands are newly supported.
You can initialize easily only by
setting the parameter and no
special procedure is required
Protection function expands to
not only input side but output side,
which provides more reliable
protection against the phase loss.
Advertisement
Table of Contents
