Hitachi SJ700D-004L Instruction Manual page 132

Chapter 4
Data Description
53 MJA: Major failure
54 WCO
55 WCOI
56 WCO
4.2.59 Intelligent output terminal a/b (NO/NC) selection
The intelligent output terminal a/b (NO/NC) selection function allows
you to specify a-contact or b-contact output for each of the intelligent
output terminals [11] to [15] and the alarm relay terminal.
The intelligent output terminals [11] to [15] are used for open-collector output, and the alarm relay terminal is used
for relay output.
Item
Terminal active state
Alarm relay active state
- An a-contact turns on the output signal when closed and turns it off when opened.
- A b-contact turns on the output signal when opened and turns it off when closed.
(1) Specifications of intelligent output terminals [11] to [15]
Intelligent output terminals [11] to [15] have the following specifications:
Inside the
inverter
Setting of C031 to C035
00
(a-contact)
01
(b-contact)
(2) Specifications of alarm relay terminal
The alarm relay terminal uses a normally-closed (NC) contact that operates as described below.
Inside the
inverter
Example of operation as an alarm output terminal
Setting of Power Inverter
C036 supply status
Error
ON
00 Normal
－
OFF
Error
ON
01
Normal
(default)
－
OFF
Major failure signal
Window comparators function
Function code
C031 to C035
C036
15 CM2 ... ... 11
Power supply Output signal
ON
ON
OFF
－
OFF
ON
ON
OFF
－
OFF
AL0 AL1 AL2
Output terminal state
AL1-AL0 AL2-AL0
Closed Open
Open Closed
Open Closed
Open Closed
Closed Open
Open Closed
Explanation of Functions
Reference item
C031 to C035: Terminal [11] to [15] active state
C036: Alarm relay active state
Data
00
01
00
01
(Between each terminal and CM2)
Voltage drop when turned on: 4 V or less
Allowable maximum voltage: 27 VDC
Allowable maximum current: 50 mA
Maximum contact
capacity
AL1-AL0
Minimum contact
capacity
Maximum contact
capacity
AL2-AL0
Minimum contact
capacity
4-61
Availability(Yes or No)
CT mode VT mode
Y Y
Y Y
Y Y
Y Y
Related code
Description
a-contact (NO)
b-contact (NC)
a-contact (NO)
b-contact (NC)
Electric characteristics
Resistance load Inductive load
250 VAC, 2 A 250 VAC, 2 A
30 VDC, 3 A 30 VDC, 8 A
100 V AC, 10 mA
5 VDC, 100 mA
250 VAC, 1A 250 VAC, 0.2 A
30 VDC, 1A 30 VDC, 0.2 A
100 VAC, 10 mA
5 VDC, 100 mA
Page
4-70
4-71