Endress+Hauser Proline Prosonic Flow 93 Function Manual page 24

4 Block QUICK SETUP
!
24
Note!
• The display returns to the cell QUICK SETUP COMMISSIONING (1002) if you press the ESC key
combination (X) during interrogation.
• If you confirm the inquiry "Automatic configuration of the display?" as YES, the configuration of
the display will be carried out as follows: main line = volume flow, additional line = totalizer 1,
information line = operational/system condition.
➀
Only the units not yet configured in the current Quick Setup are offered for selection in each cycle.
The unit for volume is derived from thevolume flow unit.
➁
The "YES" option remains visible until all the units have been configured. "NO" is the only option
displayed when no further units are available.
➂
Only the outputs not yet configured in the current Quick Setup are offered for selection in each
cycle.
➃
The "YES" option remains visible until all the outputs have been configured. "NO" is the only option
displayed when no further outputs are available.
Device functions Proline Prosonic Flow 93
Endress+Hauser