To Set Up Wan Service For Ethernet Interface - Tenda V300 User Manual

4.2.3

To Set up WAN Service for Ethernet Interface

Log in to the web UI, choose Advanced > Advanced Setup > WAN Service to enter the following page.
Step 1 Click Add.
Step 2 Select the interface you create in Layer2 Interface, interface atm0/(0_1_35) here.
Step 3 Click Next.
Step 4 Select a WAN service type according to the instructions in the table below. Here take PPPoE as an
example.
Connection Type
PPP over Ethernet (PPPoE)
IP over Ethernet Dynamic IP
34
Description
Select thus type if your internet service provider (ISP) provides a user
name and password to you for internet access.
Select thus type if your ISP does not provide any parameters to you for
internet access.