Tenda V300 User Manual page 114

Parameter
Select SSID
MAC Restrict Mode
MAC Address
Add
Remove
To add a MAC filter rule, perform the following procedure:
Step 1 Select a SSID to apply the rule if you enable multiple SSIDs.
Step 2 Click Add.
Step 3 Enter the MAC address of the device to which the rule applies.
Step 4 Click Apply/Save.
Step 5 Select Allow or Deny according to your needs.
Step 6 Click Apply/Save.
106
Description
Select a SSID to apply the rule.
The rule is only applicable to the devices connected to the modem router wirelessly.
Disabled: Disable this feature.
Allow: Only allow devices at specified MAC addresses (in the list) to connect to your
wireless network.
Deny: Only forbid devices at specified MAC addresses (in the list) to connect to your
wireless network.
The MAC address of a device to which a MAC filter rule applies.
Click the button to add a rule.
Select a rule you want to remove, and then click the button to remove the rule.