Table of Contents
Advertisement
To configure system logs, perform the following procedure:
Step 1
Set Log to Enable.
Step 2
Select a logging level from the Log Level drop-down list box. All the system events at or above the
selected level are logged.
Step 3
Select a log display level from the Display Level drop-down list box. Only the logs at or above the
selected level can be viewed.
Step 4
Click Apply/Save.
---End
7.4
SNMP Agent
The Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and
status from the SNMP agent in this device.
Choose Management > SNMP Agent to enter the configuration page.
To configure the SNMP agent, perform the following procedure:
Step 1
Set SNMP Agent to Enable.
Step 2
Set Read Community to the password for reading data. The default value is public.
Step 3
Set Set Community to the password for writing data. The default value is private.
Step 4
Set System Name to the name of the system.
Step 5
Set System Location to the location of the system.
Step 6
Set System Contact to the contact information of the system.
122
- Quick Links:
- Front Panel
- Quick Setup
Hide quick links:
Advertisement
Table of Contents
