4G Dial; G/4G Dial - Tenda V300 User Manual

Step 2 Link Type: Select Ethernet.
Step 3 Connection Type: Select IPoE.
Step 4 Address Mode: Select Static IP.
Step 5 Enter the static IP address, and other related parameters.
Step 6 Click OK on the bottom of the page to apply the settings.
--End
Bridge
Select thus type when this device only serves as a switch, and you want to set up a dial-up connection or enter
other internet parameters directly on your computer for internet access.
Step 1 Log in to the web UI and enter the Home page.
Step 2 Link Type: Select Ethernet.
Step 3 Connection Type: Select Bridge.
Step 4 Click OK on the bottom of the page to apply the settings.
--End
2.4.3

3G/4G Dial

If you connect the modem router to the internet via a 3G/4G dongle, refer to the configuration in this part to
complete your internet settings.
13