Dsl - Tenda V300 User Manual

Step 2 D-DNS provider: Specify a DDNS service provider. The supported service providers include dyndns.org,
oray.com.
Step 3 Hostname: Specify the DDNS domain name register on a DDNS service provider's website.
Step 4 Interface: Specify a WAN connection interface.
Step 5 Username/Password: Specify the user name and password registered on a DDNS service provider's
website for logging in to the DDNS service.
Step 6 Click Apply/Save.
--End
4.14

DSL

DSL parameter configurations must be supported by ISP to take effect. Actual parameters (refer to Statistics-xDSL)
resulted from the negotiation between your router and ISP. Wrong configurations may fail your Internet access.
The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP or our
technical staff when your modem router fails to negotiate with ISP in DSL (ATM) mode. Usually, this failure can be
identified and confirmed if the ADSL LED on the device keeps displaying a slow or quick blinking light.
Choose Advanced > Advanced Setup > DSL to enter the configuration page.
75