Dns; Dns Server - Tenda V300 User Manual


Only the WAN interface that disables NAT is displayed in the list.

After configuration, reboot the modem router to take effect the settings.
4.13

DNS

4.13.1

DNS Server

The DNS server translates domain names to numeric IP addresses. It is used to look up site addresses based on
their names.
Choose Advanced > Advanced Setup > DNS > DNS Server to enter the configuration page.
For IPv4:
-Click the Select DNS Server Interface from available WAN interfaces option
-Or select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the
system
And then click Apply/Save.
For IPv6:
-Select Obtain IPv6 DNS info from a WAN interface and Select a configured WAN interface for the IPv6 DNS
server information.
-Select Use the following Static IPv6 DNS address and enter the static IPv6 DNS server Addresses.
And then click Apply/Save.
73