Tenda V300 User Manual page 58


IPv6 address can only be Aggregate Global Unicast Address and Unique Local Address. Link-Local
Unicast Addresses and Multicast Addresses are not permitted.

The IPv6 address must be entered with a prefix length.
Parameter
Enable DHCPv6 Server
Stateless
Stateful
Start interface ID/End
interface ID
Leased Time (hour)
Enable RADVD
Enable ULA Prefix
Advertisement
Randomly Generate
Statically Configure
50
Description
Check to enable the DHCPv6 Server.
If selected, IPv6 clients will generate IPv6 addresses automatically based on the Prefix
Delegation's IPv6 prefix and their own MAC addresses.
Stateful DHCPv6 is supported based on the assumption of prefix length less than 64.
Select this option and configure the start/end interface ID and leased time. The router
will automatically assign IPv6 addresses to IPv6 clients.
Specify the start/end interface ID Interface ID does NOT support ZERO COMPRESSION
"::". Please enter the complete information. For example: Please enter "0:0:0:2"
instead of "::2".
The lease time is a time length that the IP address is assigned to each device before it
is refreshed.
The RADVD (Router Advertisement Daemon) implements link-local advertisements of
IPv6 router addresses and IPv6 routing prefixes using the Neighbor Discovery Protocol
(NDP) and is used by system administrators in stateless auto configuration methods of
network hosts on Internet Protocol version 6 networks. Check the checkbox to enable
the RADVD.
If enabled, the router will advertise ULA prefix periodically.
If selected, address prefix can be automatically generated.
If you select this option, you need to manually configure the address prefix and life