Iptv - Tenda V300 User Manual

Last Member Query
Interval (1-999)
Robustness Value
(1-999)
Maximum Multicast
Groups (1-32)
Maximum Multicast
Data Sources (for
IGMPv3: [1-24])
Maximum Multicast
Group Members (1-32)
Fast Leave Enable
LAN to LAN (Intra LAN)
Multicast Enable
4.22

IPTV

Choose Advanced > Advanced Setup > IPTV to enter the configuration page.
To configure the IPTV function, perform the following procedure:
Step 1 Select Enable IPTV option.
96
It specifies the interval for sending query message of specified group. The default is
10. The range of the query interval is from 1 to 999. The unit is "s".
It specifies the robustness value of IGMP (MLD) querier. The default is 2. The range of
the query interval is from 1 to 999.
It specifies the maximum number of multicast group for each interface. The default is
25. The range of the query interval is from 1 to 32.
It specifies the maximum number of multicast data sources. The default is 10. The
range of the query interval is from 1 to 24.
It specifies the maximum number of multicast group member.
This function is useful when you use some applications, such as IPTV, which require
changeable fast channel.
This function is useful when you want to use multicast data source of LAN as well as
IGMP (MLD) interception.