Table of Contents
Advertisement
Wireless N300 ADSL2+ High Power Modem Router
Go to
To Set up WAN Service for ATM Interface
to configure the WAN service for Internet access.
Tip
If you are unsure about the VPI/VCI parameters, see
Appendix 4 VPI/VCI
List, or ask your ISP to provide it.
To set up the ETH interface
Step 1: Select ETH Interface and click Add.
Step 2: Select eth0/eth0 in the box to function as a WAN port. Only one LAN port can be configured as the WAN port at
a time. Click Apply/Save to take the settings into effect.
17
Hide quick links:
Advertisement
Table of Contents
