Tenda V300 User Manual page 60

Parameter
Use Interface
Service Name
Server IP Address
External Port Start and
External Port End
Protocol
Internal Port Start and
Internal Port End
Application Example
You have set up an FTP server on your LAN:
- An FTP server (using the default port number of 21) at the IP address of 192.168.1.100
And want your friends to access the FTP server and web server on default port over the internet. To access your
FTP or web server from the Internet, a remote user has to know the Internet IP address or internet name of the
modem router, such as www.tendacn.com. In this example, we assume the internet IP address of your router is
183.37.227.201. Then follow instructions below:
To configure the router to make your local FTP server public:
Choose Advanced > Advanced Setup > NAT > Virtual Server to enter the configuration page.
52
Description
Select a WAN connection to which you wish to apply the rules. When there is only one
WAN connection available, the rules will be automatically applied to it.
Select a Service: Allows you to select an existing service from the drop-down list.
Custom Service: Allows you to customize a service.
Enter the IP address of your local computer that will provide this service.
These are the start number and end number for the public ports at the internet
interface.
Select a protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP.
These are the start number and end number for the ports of a computer on the
router's local area network (LAN).