Table of Contents
Advertisement
Step 1
Click Add.
Step 2
Tunnel Name: Tunnel Specify a tunnel name.
Step 3
Mechanism: It specifies the 6in4 tunnel implement mechanism. The modem router only supports 6RD.
Step 4
Associated WAN Interface: Specify an associated WAN interface for the 6in4 tunnel. The WAN
interface is required to use IPv4 protocol only.
Step 5
Associated LAN Interface: Specify an associated LAN interface for the 6in4 tunnel.
Step 6
Select the type of obtaining border relay address: manual or automatic.
Manual: Manually set a 6RD-BR address.
Automatic: Automatically obtain a 6RD-BR address from upstream device. If you select Automatic, skip step
7 - 9.
Step 7
IPv4 Mask Length: Specify the IPv4 mask length.
Step 8
6rd Prefix with Prefix Length: Specify the 6rd prefix with prefix length.
Step 9
Border Relay IPv4 Address: Specify the border relay IPv4 address of WAN.
Step 10
Click Apply/Save.
--End
4.18.2
IPv4inIPv6
IPv4inIPv6 is an Internet interoperation mechanism allowing Internet Protocol version 4 (IPv4) to be used in an
IPv6 only network. 4in6 uses tunneling to encapsulate IPv4 traffic over configured IPv6 tunnels.
Choose Advanced > Advanced Setup > IP Tunnel > IPv4inIPv6 to enter the configuration page.
89
- Quick Links:
- Front Panel
- Quick Setup
Hide quick links:
Advertisement
Table of Contents
