Chapter Three Connect to the Broadband Router
3.1 Set up LAN Connection
Please connect the LAN port with the switches or Hubs in the LAN. Or you
can also connect the LAN port of your router directly to the LAN adapter of
your computer.
3.2 Set up WAN Connection
Please connect your xDSL or Ethernet to the WAN port of the router with
Cat. 5 cable.
Dynamic IP: To distribute IP Address through DHCP service
Static IP: To connect to the Internet through fixed IP Address provided by
your ISP
Chapter Four Configuration on the Router
Before using the router, please have proper network configuration on your
computer, this would enables you to have normal communication with the
router.
4.1 Set up proper Network Configuration
Please set the IP address of your computer as auto-obtain or Fix IP
Address. The router has its factory default IP address which is
"192.168.0.1", please open IE and enter "192.168.0.1" in the address
bar. The system would require the user to enter User Name and
Password as the figure below. Please enter the User Name and
TEI480T/490T/4000 Enterprise & Net-bar Level Router
10