5.2 FIRMWARE UPGRADE VERSION V7.00 OR HIGHER
5-
Once the password is obtained enter in the above window and the following messages will appear if the password
is correct.
6-
After the successful operation, the "SEND" button will be disabled. It is not allowed to make another change from
here, so it can be seen what changes have been made. The new order code will appear on the status bar.
5
5-28
Figure 5–46: EXECUTED SUCCESFULLY
Figure 5–47: NEW ORDER CODE
F650 Digital Bay Controller
5 BOOTCODE AND FIRMWARE UPGRADE
GEK-113000AE