GE F650 User Manual page 103

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE
• Upgrade 650 web server (Ethernet connection):Go to "Communications> Upgrade 650 web server". The relay web
server application can be updated to further versions (if available) using this menu without modifying the relay
operative system.
• Upload info files to relay (Ethernet connection): Go to "Communications>Upload info files to relay". This functionality is
used to store setting files (*.650) inside the relay, as well as auxiliary files used by the programmable logic graphical
editor (*.pep, *.aut, *.lib).
• Download info files from relay (Ethernet connection): Go to "Communications>Download info files from relay". This
functionality is used for retrieving the files (*.650 and *.pep, *.aut, *.lib) that have been previously stored in the relay
flash memory.
Important Note:
*.650 files contain protection, control settings, relay configuration and compiled logic
equations. This file can be retrieved from the relay, using the "File>Get info from
relay" option in EnerVista 650 Setup (through serial or Ethernet communication).
"File>Send info to relay" option stores this *.650 file in the relay.
*.pep, *.aut and *.lib files contain the logic configuration projects necessary to modify the
logic (virtual outputs) in the relay. These files can be stored in the relay, using the
"Communication>Upload info files to relay" option in EnerVista 650 Setup (through
Ethernet communication). They can be retrieved using "Communication>Download
info files to relay" option in EnerVista 650 Setup program (Ethernet communication).
Take into account that the *.pep, *.aut and library files are necessary to modify the PLC
logic (virtual outputs). Without these files setting and configuration can be modified but
not logic
"Communication>Upload info files to relay" option to store these logic configuration
files into the relay.
It is important to distinguish between "Send / Get info to relay" and "Upload /
Download info files to/from relay". "File>Send/Get info to relay" sends/gets
settings and configuration and compiled logic equation to/from the relay (*.650 format),
and the relay automatically starts working with the new settings once they are stored.
"Communications>Upload/Download info files to relay", stores/retrieves in the
relay hard disk: settings, configuration and compiled logic equations (*.650) besides the
PLC files (*.pep, *.aut, *.lib). This is only a physical storage (file backup).
GEK-106310AE
equations (virtual outputs).
F650 Digital Bay Controller
It is advisable to use
3
the
3-37