1 GETTING STARTED
1.1 IMPORTANT PROCEDURES
1.1.3 SAFETY INSTRUCTIONS
1
The F650 ground screw shown in Figure 1–5: must be correctly grounded.
Figure 1–5: LOCATION OF GROUNDING SCREW
Before communicating with a F650 unit through the front USB port, please ensure that the computer's power supply is
grounded. In case of using a laptop, it is recommended not to have it connected to its power supply.
In many cases it might not be correctly grounded either due to the power supply or to the connector cables used.
GE Multilin will not be responsible for any damage to the relay or connected equipment whenever this elemental safety rule
is not followed.
GEK-113000AE
F650 Digital Bay Controller
1-7