GE F650 User Manual page 81

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE
CASE 1: If setting groups option is disabled at Setpoint >Control Elements> Setting group at source file, conversion will
perform in destination file as follow:
• Settings of different elements (Phase TOC High 1, 2 and 3) that belong to Setting group 1(SG1) at source file will be
copied in elements that belong to Setting Group 1 at destination file.
• Elements in the other setting groups will be configured with default values in configuration file.
SG1
Phase
G1 G2
TOC High
Function ENABLED
Input
Pickup
0,10 1,50
Level
Curve Definite time
TD
0,02 0,05
Multiplier
Reset
Voltage
Restraint
Snapshot
Events
CASE 2: If setting groups option is enabled at Setpoint >Control Elements> Setting group at source file, conversion will
perform in destination file as follow
• Settings of different elements (Phase TOC High 1, 2 and 3) that belong to different setting groups in source file will be
copied in elements that belong to first group of first three setting groups at destination file
• Protection elements in the other groups/setting groups will be configured with default values at destination file.
SG1
Phase TOC
G1 G2 G3
High
Function ENABLED
Input
Pickup Level 0,10
Definite
Curve
time Ext Inv
TD Multiplier 0,02
Reset
Voltage
Restraint
Snapshot
Events
GEK-106310AE
SG2 SG3
G3 G1 G2 G3 G1
2,00
0,10
INSTANTANEOUS
SG2
G1 G2 G3
ENABLED DISABLED
1,50 1,00
1,00
IEEE IEEE Ext
Definite time
Inv
1,00 0,05 1,00
F650 Digital Bay Controller
SG4
G2 G3 G1 G2 G3 G1
DISABLED
PHASOR(DFT)
1,00
IEEE Ext Inv
1,00
DISABLED
ENABLED
SG3 SG4
G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3
ENABLED
PHASOR(DFT)
2,00
Definite time
0,10
INSTANTANEOUS
DISABLED
ENABLED
SG5 SG6
G2 G3 G1 G2 G3
SG5 SG6
DISABLED
1,00
IEEE Ext Inv
1,00
3-15
3