Security; Adding Users; User Rights - GE F650 User Manual

4 SECURITY

4 SECURITY 4.1 ADDING USERS
New users can only be added by users that have Administrator Access (or Admin Rights). The Enable Security check
box located in the Security->User Management window must be enabled.
Remember: (In order to add new users and assign user rights )
• must be logged in with Administrator Permission
• and Enable Security checkbox must be enabled
NOTE: Only Administrators have access to the User Management dialog box.
Following is a list of all of the User Rights Options available to be granted to users, and their functions.
Table 4–1: USER RIGHTS AND FUNCTIONS
RIGHT FUNCTION
If this box is checked when the Administrator exits the User Management dialog box, the program will ask you to
Delete Entry confirm the delete and if the Administrator chooses "yes", then the user whose "Delete Entry" box was checked
will be permanently deleted from the list.
WARNING: When this box is checked, the user will become an EnerVista 650 Setup Administrator, therefore
Admin.
receiving all of the Administrative rights.
When this box is checked, the user will have the ability to view Actual Values and all records excluding event
Actual Values
recorder.
When this box is checked, the user will have access to view and modify Settings (Protection, control, inputs/
Settings
outputs and calibration).
Commands When this box is checked, the user will be able to use Commands.
Event Recorder When this box is checked, the user will have access to use Event Recorder.
Force IO When this box is checked, the user will be able to use Force IO application.
When this box is checked, the user will have the ability to view and modify Relay Configuration and Logic
Logic Configuration
Configuration.
When this box is checked, the user will have the ability to upgrade firmware, bootware and to upload and
Upgrade
download info files to/from relay.
By default, Administrator and Service users are created with "password" as default password.
GEK-113000AE F650 Digital Bay Controller

4.1 ADDING USERS

4.1.1 USER RIGHTS

4
4-1