GE F650 User Manual page 177

5 BOOTCODE AND FIRMWARE UPGRADE
5. If the file has not been successfully sent, the following message box is displayed.
6. After sending file, upgrading process starts
7. When the flashing process has finished, a message appears informing that it is necessary reboot the unit in order to
start working with the new firmware version in the relay.
8. User settings and logic files downloading
GEK-113000AE
5.2 FIRMWARE UPGRADE VERSION V7.00 OR HIGHER
Figure 5–40: ERROR SENDING FILE
Figure 5–41: UPGRADE IN PROGRESS
Figure 5–42: REBOOT MESSAGE
F650 Digital Bay Controller
5
5-25