GE F650 User Manual page 10

1.1 IMPORTANT PROCEDURES 1 GETTING STARTED
1.1.1.2 MAGNETIC MODULE TERMINALS
1
The transformer module for the VTs and CTs is already connected to a female connector screwed to the case. The current
inputs incorporate shorting bars, so that the module can be extracted without the need to short-circuit the currents
externally. It is very important, for safety reasons not to change or switch the terminals for CTs and VTs.
Figure 1–3: REAR VIEW OF F650 UNIT
will not be responsible for any damage of the relay, connected equipment or personnel
GE Multilin
whenever these safety rules are not followed.
1-4 F650 Digital Bay Controller GEK-113000AE