GE F650 User Manual page 75

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE
Table 3.2: TYPES OF FILES GENERATED BY ENERVISTA 650 SETUP SOFTWARE OPERATION MODE ON-LINE
SETTINGS & CONFIGURATION FILE *.650
Description Settings and Configuration Section
Created by EnerVista 650 Setup
Relay configuration file containing all elements, settings,
input/output and LEDs configuration, graphic display
Contents configuration, etc.
Equations corresponding to the logic created and
compiled in the PLC Editor
Connect with the relay ("Communications>Computer") Connect with the relay ("Communications>Computer")
How to
Send settings and configuration from file
transfer to
relay
Modify settings and configuration directly in the relay:
EnerVista 650 Setup:
How to save "File>Get info from relay". User definable texts
retrieved are operations, events, and LEDs.
How to store "Communication>Upload info files to relay" through
in the relay Ethernet
How to "Communication/Download info files from relay"
retrieve from through Ethernet
the relay
Logic programming support files (*.pep, *.aut, *.lib) CANNOT be retrieved directly from the relay.
It is necessary
* Either to have stored these files in the PC
* Or to have uploaded previously the files into the relay ("Communication>Upload info files to relay")
GEK-106310AE
LOGIC CONFIGURATION FILES (*.PEP, *.AUT, *.LIB)
*.PEP
Header for Logic
project
Logic configuration
graphic editor (PLC
Editor)
PLC project file
containing the
necessary
information relative
to the relay model,
logic libraries
included in the
project (*.lib),
graphic file name
(*.aut), etc.
Launch 650 Logic equations editor ("Setpoint>Logic
Configuration")
Open the created PLC project ("File>Open Project")
Compile the project ("Run>Compile")
Now the logic (virtual outputs) can be sent directly to relay
("Run>Send Equations to Relay"). Texts of virtual outputs are
not stored in the relay, only in the logic configuration files to be
edited.
PLC Editor:
"File>Save Project"
The relay will not
provide this
information unless
the *.pep file is
stored in the relay
To store the logic configuration files in the relay use the
"Communication>Upload info files to relay" option
"Communication>Upload info files to relay" through
Ethernet
"Communication/Download info files from relay" through
Ethernet
REMINDER:
F650 Digital Bay Controller
*.AUT *.LIB
Graphical edition
container. Logic
User programmable
equations (Virtual
logic objects
Outputs) in FDB
format.
Logic configuration Logic configuration
graphic editor (PLC graphic editor (PLC
Editor) Editor)
PLC Project file
Library file to be
containing all the
included as an object
drawings used by
in a PLC project.
the logic, required
Logic packages that
by 650 relay based
can be stored into
on IEC 61131-3
libraries and be
standard.
distributed in different
Functional block
PLC projects.
diagram (FDB).
"File>Save Library"
The relay will not The relay will not
provide this provide this
information unless information unless
the *.pep file is the *.pep file is stored
stored in the relay. in the relay.
3
3-9