Countershaft - Arctic Cat DVX 400 2004 Service Manual

7. Install the reverse dog onto the driveshaft making
sure the four small dogs are facing toward the 1st
driven gear as noted in disassembling.
8. Install the 1st driven washer (right side) onto the
shoulder of the splined shaft; then install the 1st
driven bushing and gear.
9. Install the 1st driven washer (left side) on the drive-
shaft.
NOTE: The driveshaft is now completely assem-
bled for installation.

COUNTERSHAFT

Disassembling
1. Remove the 2nd drive gear and washer from the
countershaft.
2. Remove the 4th drive gear from the countershaft.
3. Remove the 4th drive washer and 4th drive circlip
from the countershaft.
CC221D
CC222D
4. Remove the 3rd drive gear from the countershaft.
5. Remove the 5th drive circlip securing the 5th drive
gear on the countershaft; then remove the first 5th
drive washer and 5th drive gear.
CC204D
CC203D
CC201D
CC200D
29