Gasoline - Oil - Lubricant; Genuine Parts; Preparation For Storage; Engine/Transmission - Arctic Cat DVX 400 2004 Service Manual

After the completion of the break-in period, the engine
oil and oil filter should be changed. Other maintenance
after break-in should include checking of all prescribed
adjustments and tightening of all fasteners.

Gasoline - Oil - Lubricant

RECOMMENDED GASOLINE
The recommended gasoline to use is 87 minimum octane
regular unleaded. In many areas, oxygenates (either etha-
nol or MTBE) are added to the gasoline. Oxygenated
gasolines containing up to 10% ethanol, 5% methane, or
5% MTBE are acceptable gasolines.
When using ethanol blended gasoline, it is not necessary
to add a gasoline antifreeze since ethanol will prevent the
accumulation of moisture in the fuel system.
! CAUTION
Do not use white gas. Only Arctic Cat approved
gasoline additives should be used.
RECOMMENDED ENGINE/
TRANSMISSION OIL
! CAUTION
Any oil used in place of the recommended oil
could cause serious engine damage. Do not use
oils which contain graphite or molybdenum
additives. These oils can adversely affect clutch
operation. Also, not recommended are racing,
vegetable, non-detergent, and castor-based oils.
The recommended oil to use is Arctic Cat 4-Cycle
Engine Oil (p/n 0436-005) or an equivalent oil which
is rated SE, SF, or SG under API service classification.
These oils meet all of the lubrication requirements of
the Arctic Cat ATV engine. The recommended engine
oil viscosity is SAE 10W-40. Ambient temperature
should determine the correct weight of oil. See the
following viscosity chart for details.
FILLING GAS TANK
Always fill the gas tank in a well-ventilated area.
Never add fuel to the ATV gas tank near any open
flames or with the engine running. DO NOT
SMOKE while filling the gas tank.
Since gasoline expands as its temperature rises, the gas
tank must be filled to its rated capacity only. Expansion
room must be maintained in the tank particularly if the
tank is filled with cold gasoline and then moved to a
warm area.
Do not overflow gasoline when filling the gas tank.
A fire hazard could materialize. Always allow the
engine to cool before filling the gas tank.
Tighten the gas tank cap securely after filling the tank.
Do not over-fill the gas tank.
When replacement of parts is necessary, use only genuine
Arctic Cat ATV parts. They are precision-made to ensure
high quality and correct fit. Refer to the appropriate Illus-
trated Parts Manual for the correct part number, quantity,
and description.

Preparation For Storage

Prior to storing the ATV, it must be properly
OILCHARTA
serviced to prevent rusting and component
deterioration.
Arctic Cat recommends the following procedure to pre-
pare the ATV for storage.
1. Clean the seat cushion (cover and base) with a damp
cloth and allow it to dry.
! WARNING
! WARNING
! WARNING

Genuine Parts

! CAUTION
ATV0049B
3